EDP Commands
39
SEC.DECPNT
Secondary units decimal
position
8.888888, 88.88888, 888.8888, 8888.888, 88888.88, 888888.8,
8888888, 8888880, 8888800
SEC.DSPDIV
Secondary units display divisions 1D, 2D, 5D
SEC.UNITS
Secondary units
LB, KG, G, OZ, TN, T, GN, TROYOZ, TROYLB, LT, NONE
SEC.MULT
Secondary units multiplier
0.00000–99999.99
DECFMT
Decimal format
DOT, COMMA
DSPRATE
Display rate
250MS, 500MS, 750MS, 1500MS, 2SEC, 2500MS, 3SEC, 4SEC,
6SEC, 8SEC
Command
Description
Values
Table 5-4. FORMAT EDP Commands (Continued)
Command
Description
Values
WZERO
Zero calibration
—
WVAL
Test weight value
test_weight_value
WSPAN
Span calibration
—
WLIN.F1–WLIN.F5
Actual raw count value for linearization points 1–5
—
WLIN.V1–WLIN.V5
Test weight value for linearization points 1–5
test_weight_value
WLIN.C1–WLIN.C5
Calibrate linearization points 1–5
—
REZERO
Rezero —
LC.CD
Set deadload coefficient
value
LC.CW
Set span coefficient
value
Table 5-5. CALIBR EDP Commands
Command
Description
Values
EDP.BAUD
EDP port baud rate
300, 600, 1200, 2400, 4800, 9600, 19200
EDP.BITS
EDP port data bits/parity
8NONE, 7EVEN, 7ODD
EDP.TERMIN
EDP port termination character
CR/LF, CR
EDP.EOLDLY
EDP port end-of-line delay
0–255
(0.1-second intervals)
EDP.HANDSHK
EDP port handshaking
OFF, ON
EDP.ADDRESS
EDP port RS-485 address
0, 01–255
EDP.AB-RIO
EDP port Remote I/O stream
OFF, ON
EDP.STREAM
EDP port streaming
OFF, ON
PRN.BAUD
Printer port baud rate
300, 600, 1200, 2400, 4800, 9600, 19200
PRN.BITS
Printer port data bits/parity
8NONE, 7EVEN, 7ODD
PRN.TERMIN
Printer port termination character
CR/LF, CR
PRN.EOLDLY
Printer port end-of-line delay
0–255
(0.1-second intervals)
PRN.HANDSHK
Printer port handshaking
OFF, ON
PRN.STREAM
Printer port streaming
OFF, ON
PRNDEST
Print destination
EDP, PRN, BOTH
Table 5-6. SERIAL EDP Commands