Serial Commands
73
6.1.2
ID Commands
Up to 150 codes can be entered under ID commands.
Table 6-2. ID Commands
Command
Function
ID.CODE#
n
ID code
ID.DESC#
n
Item description
ID.LOCATION#
n
Item stock location
ID.LOT#
n
Lot number
ID.PARTNUMBER#
n
Part number
ID.QUANTITY#
n
Inventory quantity
ID.TARE#
n
Tare weight value
ID.UNITS#
n
Units for tare and unit weight values
ID.UNITWEIGHT
#n
Unit weight value
ID.CLRALL
Clear all IDs from memory
Note: The ID.CLRALL command only works in setup mode
ID.CLEAR.INDEX
#n
Clear ID at index n from memory
ID.CLEAR.CODE
#n
Clear ID with code of n from memory
6.1.3
Reporting Commands
Reporting commands send specific information to the serial port. The commands listed in Table 6-3 can be used in
all modes.
Table 6-3. Reporting Commands
Command
Function
DUMPALL
List all parameter values, ID information and setpoint data
DUMPCONFIG
List all parameter values excluding ID information and setpoint data
DUMPAUDIT
List audit trail information
DUMPBUFFER
Lists Weighvault buffer information
DUMPIDS
List all ID information
DUMPID.INDEX
List a specific ID by index. See Section 6.1.7 on page 78 for more information.
DUMPIDCODE
List a specific ID by code. See Section 6.1.7 on page 78 for more information.
VERSION
Write
Counterpart
software version
P
Write current displayed weight with units identifier. See Section 9.2.1 on page 90.
XE
Returns a 10-digit code representing any error conditions currently shown on the front panel.
ADCS
Return number of A/Ds installed
Note
Transmit all configuration settings with the DUMPALL command.
KENTER
Press the ENTER key.
KLOCK
Lock specified front panel key. For example, to lock the ZERO key, enter KLOCK = KZERO.
KUNLOCK
Unlock specified front panel key. For example, to unlock the PRINT key, enter KUNLOCK = KPRINT.
KDATE
Display date (pseudo key).
KTIME
Display time (pseudo key).
KESCAPE
Exits the selected parameter. Returns to weigh mode if a parameter is not selected (functions identical to the
MENU key in menu mode).
KSOFT
x
Press softkey number
x
Command
Function
Table 6-1. Serial Key Press Commands
