6
Counterpart Counting Scale Indicator
Set Date and Time
1. If the softkey is enabled, push the softkey. The current value is displayed.
2. To change, use the Up/Down arrows to highlight the value to change.
3. Press the
TARE
key to save and exit.
Set Serial Scale (Scale 3)
1. Select Port 1 — Indust Scale.
2. Match the baud rates. Upon doing this it automatically becomes Scale 3.
Setting up a Softkey
To set up a softkey, use the following steps:
1. Press the
MENU SETUP
MENU
SETUP
key.
2. Navigate through the menu setup to Setup using the key.
3. Press
to navigate to
CONFIG
.
4. Press
to navigate to
SCALES.
5. Press to navigate to
FEATURE.
6. Press
to navigate to
COUNT.
7. Using scroll through until you get to
SOFTKEYS
.
8. Scroll down. Then using scroll through menu selections SK1 through SK12.
9. Press to assign a softkey to that position.
10. Select a choice that you wish to be displayed.
11. Press once the function is selected.
12. Press
Save/Exit
softkey.
