RHINO FC-0110, Operator'S Manual

Page: 60 / 166

OPERATION
TR308 04/21 Operation Section 4-2
O
PE
R
AT
IO
N
@ 2021 Alamo Group Inc.
RHINO TR308 ROTARY MOWER
OPERATION INSTRUCTIONS
Rhino rotary mowers are manufactured with quality material by skilled workers. These mowers are designed to
cut grass, weeds, small brush and other vegetative material up to 3” diameter in areas such as pastures,
industrial areas, and roadsides. The mower is equipped with protective deflectors and/or chain guards to
prevent objects being thrown from the mower by the blades, however, no shielding is 100% effective. All
shields, guards, deflectors, and chains equipped on the unit must be maintained on the mower in good
operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
within 300 feet of the unit unless:
•
All THROWN OBJECT SHIELDING
including, Front and Rear Deflectors, Chains Guards, Steel Guards,
Bands, Side Skirts and Skid Shoes in place and in good condition when mowing.
• Mower sections or wing are adjusted to be close and parallel to ground without exposing blades.
•
MOWING AREA
has been inspected and foreign materials and debris have been removed.
•
PASSERSBY
are inside enclosed vehicle.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper mower
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a rotary mower. Some pictures may show shields removed for purposes of clarity.
NEVER OPERATE this implement without all shields in place and in good operational condition. The operator
must be familiar with the mower and tractor operation and all associated safety practices before operating the
mower and tractor. Proper operation of the mower, as detailed in this manual, will help ensure years of safe
and satisfactory use of the mower.
IMPORTANT:
To avoid mower damage, retorque all bolts after the first 10 hours of operation. Retighten blade
carrier retaining nut on gearbox lower shaft to 600 ft. lbs.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND IMPLE -
MENT.
If you do not understand any of the instructions, contact your nearest authorized dealer for a full expla -
nation. Pay close attention to all safety signs and safety messages contained in this manual and those affixed
to the implement and tractor. OPS-U- 0001str
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Death or serious
injury may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards. (SG-2str)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad. (SG-3str)