RHINO MOTION CONTROLS
RMCS-1120
Hybrid Servo Driver with Modbus RTU communication
(Max. 50Vdc and 7A per phase)
http://www.rhinomc.com
Page 18
Hybrid AC Driver [RMCS-1120]
To connect this software to drive you will need a USB to
RS485 or Serial to RS485 converter as shown in image
below.
D+ and D- Lines needs to be connected between drive and
converter. After connecting and installing the driver you
need to make sure that hardware or virtual Com port is
between the range of Com1 to Com32. Com Port beyond
this range are incompatible with the software. You may
change the COM port from device manager.
You may connect multiple drives on same paralleled
connection to D+ and D- lines.
