REVELL Control GLOWEE, User Manual

Page: 7 / 22

24089
12 13
IMPOrTaNT FeaTUreS
Micro helicopter:
• New coaxial rotor system with
electronic gyro for outstanding flight
characteristics
• Sturdy plastic hull with headlamp
• Integrated rechargeable LiPo battery
(Lithium Polymer battery)
• Uncomplicated charging of the battery
directly through the charging unit with
microprocessor-monitored charge
control integrated in the remote
control
Maintenance and care:
• Please only use a clean, damp cloth
to wipe off the helicopter.
• Protect the helicopter and batteries
from direct sunlight and/or direct
heat.
• Never allow the helicopter to come
into contact with water. This may
result in its electronics becoming
damaged.
Remote control battery safety
instructions:
• Non­rechargeable batteries may not
be charged.
• Rechargeable batteries must be
removed from the remote control
prior to recharging.
• Rechargeable batteries may only be
charged under the supervision of an
adult.
• The combination of different types of
batteries as well as new and used
batteries must be avoided.
• Only recommended batteries or those
of an equivalent type may be used.
• Single­use batteries for this remote
control and other electrical devices
operated in the home can be
replaced with environmentally-friendly
rechargeable batteries.
• Batteries must be inserted according
to the correct polarity (+ and -).
Safety instructions:
• This helicopter is only suitable for use
indoors and not for use outdoors.
• This helicopter is suitable for pilots who
are at least 15 years of age. Adult
supervision is required when flying it.
• Keep your hands, face, hair and loose
clothing away from the rotor.
• Switch off the remote control and
helicopter when they are not in use.
• Remove the batteries from the remote
control when it is not in use.
• Always maintain visual contact with the
helicopter in order to avoid losing
control of it.
• We recommend new alkali manganese
batteries for the remote control.
• As soon as the remote control no longer
functions reliably, new batteries should
be inserted.
• Please keep this operating manual safe
for later use.
• The user should only operate this
helicopter in accordance with the
instructions for use in this operating
manual.
• Do not fly the helicopter near people,
animals, bodies of water or power lines.
• The charging unit for the LiPo battery is
specially designed for charging the
helicopter battery. The charging unit
may only be used to charge the
helicopter battery, not other batteries.
• Depleted batteries must be
removed from the remote control.
• The connection terminals may not
be short-circuited. Please remove
the batteries from the remote
control if it will not be used for an
extended period of time.
The helicopter is equipped with
a rechargeable lithium polymer
battery. Please observe the
following safety instructions:
• Never throw LiPo batteries into a
fire or store them in a hot location.
• Only use the charging unit inte-
grated in the remote control for
charging.
• When disposing of batteries, they
must be discharged or their
capacity must be fully depleted.
Cover exposed terminals with
adhesive tape in order to prevent
short-circuiting!
Safety instructions:
• The product may never be structur-
ally modified. This may lead to it
becoming damaged or posing a
danger.
• Avoid the risk of danger by never
operating the aircraft while sitting
on the ground or in a chair.
Operate the aircraft from a position
that allows easy evasion if
needed.
• Always switch off the aircraft and
the remote control after use.
Otherwise, it is possible for the
model to be unintentionally
started.
Required batteries for t he
helicopter:
Power supply: ===
Rated output: DC 3.7 V / 150 mAh /
0.56 Wh
Batteries: 1 x 3.7 V rechargeable
LiPo battery (integrated)
Capacity: 150 mAh
USB charger:
Power supply: ===
Rated output: 5 V / 500 mA
Battery requirement
for the re mote control:
Power supply: ===
DC 9 V
Batteries: 6 x 1.5 V “AAA”
(not supplied)
1 helICOPTer
1A
Stabiliser
1B Counter-rotating
rotor blades
1C Search head-
lamp
1D
Charge socket
1E Landing skid
1G ON/OFF switch
2 reMOTe CONTrOl
2A
GHz antenna
2B Turbo button
2C Up/Down thrust
control
2D Charge LED
2E ON/OFF switch
2F Power LED
2G
Left/right trim
control
2H Forward and
backward flight.
Fly left/right,
lamp switch
2I Charge cable
compartment
3 INSerTINg BaTTerIeS
(reMOTe CONTrOl)
3A Unscrew and remove the cover.
3B Insert 6 x 1.5 V AAA batteries and
pay attention to the polarity, as
shown in the battery compartment.
3C Close the battery cover and secure
with the screw.
English