Respironics DreamStation, Service & Technical Reference Manual

Page: 99 / 135

P
AGE
6-26 1117539, V
ER
. 07
6.2 C
REATING THE
S
ERIAL
/M
ODEL
N
UMBER
L
ABEL
In the case that the Bottom Enclosure of the PAP device or Bottom Cover of the Humidifier is replaced during
service, or if there is damage to the labels, all information on the serial/model number labels is required to be
duplicated in order to maintain proper traceability. Refer below for details on reprinting the labels.
F
IGURE
6-36: E
XAMPLE
L
ABEL
6.2.1 E
QUIPMENT
(P
RINTER
)
Recommended Equipment:
Zebra GX430T or similar
Printer Specifications:
· Label printer
· Monochrome
· Direct thermal/thermal transfer
· Roll (4.25 in)
· 300 dpi
· up to 240.9 inch/min
· USB
· LAN
· serial
6.2.2 S
OFTWARE
Recommended Software:
Loftware Software and Print Key (Fees Apply)
•
For a full detailed list of Loftware supported printers and fees, please refer to http://www.loft-
ware.com/support/tech_printers.cfm
•
For software support, visit their website at www.loftware.com
NOTE
The new label MUST include the same Model Number, Serial Number and
UDI number as those of which are on the original label.
Model Name
Model Number
Serial Number
UDI Number (Unique Device Identifier)
Serial Number
Manufacturing Date
Revision Number