2-2 System installation
Installing the RETROSCAN scanning
system to your machine tool and
personal computer
WARNING
INSTALLATION OF THE RETROSCAN SCANNING SYSTEM MUST ONLY
BE UNDERTAKEN BY FULLY QUALIFIED PERSONNEL WHO ARE FULLY
CONVERSANT WITH ALL SAFETY PROCEDURES AND LEGISLATION IN
FORCE IN THE COUNTRY OF USE.
CAUTION
OBSERVE ANTI-STATIC PRECAUTIONS AT ALL TIMES. FAILURE TO
ADEQUATELY PROTECT AGAINST STATIC DISCHARGE CAN RESULT
IN DAMAGE TO THE PROBE INTERFACE CARD (CC1)
Note...
Prior to beginning installation of the RETROSCAN scanning system to
your machine tool, ensure that you have the following documentation.
Where necessary, the SP2-1 Scanning Probe Installation Guide and
user’s guide can be obtained through your nearest Renishaw company;
refer to ‘Before you begin’ at the front of this publication for company
names and addresses:
••••
Your computer manual.
••••
Your machine tool manufacturer’s literature.
••••
Your SP2-1 Scanning Probe Installation Guide
(publication No. H-2000-5110) and User’s Guide
(publication No. H-2000-5115).
