RESOLUTE FS with
BiSS
®
Safety
encoder system installation guide and safety manual
19
Original
instructions
L
5
5
Measuring length, ML = (L-10)
Optical centreline
12
10
RGG-2, 2-part epoxy, usually positioned
coincident with user selected scale datum
Double-sided adhesive tape
‡
0.05/50
0.5
F
F = axis of motion
Alignment dowels, maximum spacing 350
†
NOTE:
Head can be mounted in either orientation.
Encoder count direction is dependent only on scale orientation.
Increasing count direction
NOTE:
Adhesive mounted scale should not be reused after installation.
Datum edge
Adhesive datum clamp
RSLA/RELA scale installation drawing
Dimensions and tolerances in mm
*
RELA shown. RSLA installation is the same but the scale has no chamfers.
†
When scale is to be mounted vertically, position the dowels so that the datum edge is supported.
‡
Double-sided adhesive tape is included with all scale lengths.
*
(Adhesive mounted RELA shown)