25
Service and maintenance
Service
You may undertake the maintenance routines
described in these instructions.
Equipment requiring repair, overhaul or attention
under warranty should be returned to your
supplier.
Maintenance
WARNING:
Compressed air can cause physical
injuries.
CAUTION:
The APCA-45 is a precision tool and
must be handled with care.
NOTE:
Ensure the APCA-45 is firmly secured to
its mounting. Build-up of swarf on or around the
APCA-45 will be detrimental to its operation.
The APCA-45 requires minimal maintenance as it
is designed to operate as a permanent fixture on
CNC machine tools, where it is subject to a hot
chip and coolant environment. Service interval will
depend on operating environment and must be
adjusted accordingly.
Remove any swarf build-up on or around
APCA-45 daily (as a minimum, clean out any
swarf build-up in the APCA-45 weekly).
Summary of Contents for APCA-45
