13795-101 Rev. F
37
Troubleshooting
The following is a chart of errors with the ClearChart 4 and how to resolve them. If the following
does not solve an issue with the ClearChart 4, the unit may require servicing.
Problem
Probable Cause
Possible Solution
Unit will not turn on.
Not plugged into an outlet
with power.
Plug unit into a properly
volted outlet.
Power cord not fully
pushed into the power
input receptacle.
Fully install power cord.
Fuse(s) is blown.
Replace the fuse(s).
Unit will not respond
to remote control.
IR Detector is dirty.
Clean the IR detector. Refer
to the Cleaning & Mainte-
nance section of this manual.
Batteries in remote are
low.
Replace the batteries in the
remote.
Unit needs to power cycle. Turn the unit off and on.
Troubleshooting
