13795-101 Rev. F
16
Application of Input Power
1. Using the provided power cord, insert the female end into the power input receptacle located at the
bottom of the instrument. Refer to Figure SU-18.
2. Plug the male end of the power cord into a wall outlet of the appropriate voltage. Input voltage must
not exceed the range listed in the Specifications section of this manual.
3. Set the ON / OFF switch to ON ( I ).
Figure
SU-18 Power Cord and On/Off Switch
Power
Cord
On/Off
Switch
Disconnection of Input Power
At any time, the power switch can be set to OFF. The unit does not have a power down sequence.
To terminate operation of the ClearChart 4, press the ON / OFF switch to the OFF position (O).
Note:
If the ClearChart 4 is intended to be OFF for an extended period of time, the ClearChart 4
can be disconnected from power by detaching the power cord from the receptacle.
Note:
Even though the system has a low power mode, it is recommended to shut the instrument off
at the end of the day.
Installation, Features, & Functions
(continued)
