13795-101 Rev. F
10
Articulating Wall Mount
WARNING:
BE SURE TO READ THE WALL MOUNT INSTRUCTIONS THOROUGHLY AND THAT YOU
FULLY UNDERSTAND ALL THE INSTRUCTIONS AND WARNINGS BEFORE ATTEMPTING TO BEGIN
YOUR INSTALLATION.
WARNING:
THIS PRODUCT SHOULD ONLY BE INSTALLED BY SOMEONE WHO HAS A BASIC KNOWL-
EDGE OF BUILDING CONSTRUCTION, INSTALLATIONS AND FULLY UNDERSTANDS THESE INSTRUC-
TIONS.
WARNING:
MAKE SURE THAT THE SUPPORTING SURFACE WILL SAFELY SUPPORT THE COMBINES
LOAD OF THE MOUNT, THE DISPLAY AND ALL ATTACHED HARDWARE AND COMPONENTS.
WARNING:
MAKE SURE THE MOUNTING SURFACE WILL SAFELY SUPPORT THE COMBINED LOAD OF
THE EQUIPMENT AND ALL ATTACHED HARDWARE AND COMPONENTS.
WARNING:
THIS BRACKET WILL ONLY SUPPORT FLAT PANEL DISPLAYS. THE MAXIMUM LOAD CA-
PACITY IS 30 POUNDS.
WARNING:
IF MOUNTING TO A WALL OF WOOD STUD CONSTRUCTION, BE SURE THAT MOUNTING
BOLTS ARE ANCHORED TO THE CENTER OF THE STUDS.
WARNING:
ALWAYS HAVE SOMEONE ASSIST YOU TO LIFT AND POSITION YOUR EQUIPMENT.
WARNING:
TIGHTEN SCREWS AND BOLTS FIRMLY, BUT DO NOT OVER TIGHTEN. OVER TIGHTENING
CAN DAMAGE THE ITEMS AND GREATLY REDUCE THEIR ABILITY TO HOLD. PLEASE REFER TO SUG-
GESTED TORQUE VALUES WHERE APPLICABLE.
Parts Included in the Articulating Wall Mount
Make sure you have received all of the parts in the component checklist before installing the mount.
Refer to Figure SU-04. If any parts are missing or faulty contact Reichert for a replacement. (Con-
tact information is located on the back page of this User’s Guide.)
Figure SU- 04 Wall Mount and Hardware
Screws
(3 Pc)
Wall Anchors
(3 Pc)
Wall
Mount
Thumb Screws
(4 Pc)
Installation, Features, & Functions
(continued)