same keys again to continue the call or continue the call through Skype
GUI. In order to prevent such problem, suggest user to enable multi-call
function only when you need it and disable it when you don
’t need.
4. If user is calling a Skype contact with a voice mail on-going, the call
can't be reserved and user can press
“
*”
key to disconnect the call.
4.10.1 Make a Skype Multi-Call
1. When a Skype call is undergoing, pressing the Multi-Call function key
“
*
1
”
will
put the current Skype call on hold. There will be a dial tone to inform user it is
time to add another Skype contact by dialing the speed dial number(followed by
“
#
”
key for an immediate call). The same procedure can be repeated until the
maximum of 4 Skype contacts have been added.
2. User can also use the Skype window interface to make a Multi-Call. Then pick
up the phone receiver and wait for the contacts to proceed with the call.
3. When there are more than two Skype users in a Multi-Call, user might hear a
busy tone for 5 seconds if the Skype contact doesn’t answer the call or hang up
during conversation. Then a Skype dial tone comes up and user can decide to
add a new contact or press “
*
1” keys to switch to the reserved call. However,
there won’t be busy tone played if the reserved contacts hang up.
4. When user presses Multi-
Call function key “
*
1”, user needs to press key “1”
after key “
*
” within 3 seconds. Otherwise the current call will be hung up and
won’t be reserved.
4.10.2 Make a landline/Skype Multi-Call
We need user to start a Multi-Call
from a Skype call. User can’t make a landline call
first and then add another Skype contacts for a Multi-Call.
1. User can follow previous section -
Make a Skype Multi-Call
to add Skype
Summary of Contents for SkyBox S1
