Regintech SkyBox S1, User Manual

Page: 60 / 91

user wants to add a landline
contact and then call the contact’s phone number.
The same procedure can be repeated until the maximum of 4 Skype contacts
and one landline contact join the Conference.
3. User can also use the Skype window interface to make a Skype Conference call.
Then pick up the phone receiver and wait for the contacts to proceed with the
call.
4. During a Conference call, when any contact hangs up the call or is disconnected
incidentally, there will be a busy tone coming up for 3 seconds. If the hang up call
is a landline call, user can press
“
＊ ”
key to only cancel the landline call and
then make a new landline call ,
otherwise user can’t invite another landline
contact for Conference. However, user can directly add another Skype contact if
the hang up contact is a Skype call.
5. When user makes a Conference call to a contact with Skype Voicemail enable,
the call will be put separately when Voicemail function starts. The call won't join
Conference automatically. User can decide to hang up the call by pressing
“
＊
2
”
key. Then a dial tone comes up and user can decide to make a new call or go
back to the Conference by pressing Conference function key
“
＊
2
”.
6. When user makes a Conference call to a contact with an answering machine
phone, please be reminded the Conference conversation might be recorded
by the answering machine. For confidences, user can choose to hang up the
phone and re-establish the Conference call for this case.
7.
When user presses Conference function key “
＊
2”, user needs to press key “2”
after key
“
＊
” within 3 seconds. Otherwise the current call will be hung up and
won’t be reserved.
4.11.2 Hang up a Conference Call
User can press
“
＊ ”
key to hang up the established landline contact and user can
add another landline contact. However Skype contact in the Conference won't be
hung up by pressing
“
＊ ”
key.