and then hears a landline dial tone. Make a landline call as user did in the past.
When user selects Landline as the default operation mode, user can dial a landline
number directly after user picks up phone.
For Skype call, user needs to dial “#”
key first and then hears a Skype dial tone. Then make a Skype call.
User can use
“#” key to switch between VoIP and Landline modes to add more
contacts when calls have been put on hold during a
Multi-call
or
Conference
. User
can't switch operation mode when there is any call in progress.
Default is VoIP mode.
Line /Phone connection
If user changes Phone/ Line connection status after SkyBox S1 AP program is
launched or something abnormal happens for Skype or landline application, please
press
“Correct” button to force Auto-Swap function. It will automatically swap both
line connections internally even user has a wrong connection.
Language
Three languages are available: English, Simplified Chinese, and Traditional
Chinese.
If user installs SkyBox S1 in the operation system whose language is not in our
supported languages list, then Language will be set to English automatically.
The default
language is determined by the “Select Setup Language” setting during
SkyBox S1 setup program is installing.
Auto start up
If this setting is enabled, SkyBox S1 program will be automatically loaded and
executed when the computer operating system is started.
The default setting is enable.
Caller ID
When there is an incoming Skype call, Skype FSK type I caller ID will be displayed
on the phone. The default setting is enable.
Skype Recovery button
If user has problem to login Skype or Skype has bad or slow call connection
problem, user can try to press this button and user needs to exit Skype and
Summary of Contents for SkyBox S1
