landline contact( or 4 Skype contacts) during the same period of time. User can
switch talk within the reserved Skype/ landline calls by pressing function keys
”
*
1”. For detailed operation instructions, please refer to this user manual section
4.10
Make a Multi-Call
.
The default setting for Multi-Call is enable.
Note:
For Skype version 7.9 and later, multiple calls for some Skype account might
have problem. This function can fully be supported for Skype version 7.8 or
earlier version.
Conference setting & Function key
When Conference function is enabled, the function keys for Conference are “
*
2”.
Then user can make a one-on-many talk with the maximum of 4 Skype contacts
and one landline contact simultaneously.
With new Skype version, conference
function key can't setup a multiple user conference call. User needs to set up
a multiple user conference call through Skype GUI, then connects to a
landline contact using conference function key.
For detailed operation
instructions, please refer to this user manual section 4.11
Make a Conference Call
.
The default setting for Conference is enable.
Note:
1. After Skybox S1 multi-call or conference function is enabled, phone keys
“
*
1”
or “
*
2” will be function keys. When you make a Skype call(especially SkypeOut
800
service calls) and press “
*
1” or “
*
2”, this call will be paused. You can
press the same keys again to continue the call or continue the call through
Skype GUI. In order to prevent such problem, suggest user to enable multi-call
or conference function only when you need it and disable it when you don
’t need.
2. We need user to start a Multi-Call or Conference call from a Skype call. User
can’t make a landline call first and then to add another Skype contacts for a
Multi-Call or Conference call. However, user can invite the incoming Skype call
for a Multi-Call when user is on a landline call.
Summary of Contents for SkyBox S1
