Regintech SkyBox S1, User Manual

Page: 52 / 91

at Landline
mode by default and user wants to press “#” key from phone keypad to
switch to VoIP mode and redial contact’s Skype speed dial number, it might not
work.
The displayed calling time will be the callee's PC local time and the time displayed
will also be decided by the phone supporting format and whether the phone
supports time display or not.
There are two ways to set Skype speed dial number: One is to set from Skype GUI
for Skype version earlier than 4.0. For Skype version after 4.0, Skype doesn't
support Skype speed dial and user can use SkyBox S1 GUI to set speed dial
number by following this user manual sec 4.3.5 Speed Dial Setting Page . If Skype
speed dial number is set in both Skype GUI and SkyBox S1 GUI, Skype Caller ID
will take SkyBox S1 setting speed dial number for display.
4.10 Make a Multi-Call
Make sure Multi-Call function is enable before making a Multi-Call and Multi-Call
function key is
“ ＊
1
”
. User can engage in a one-on-one talk with the maximum of
3 Skype contacts and one landline contact( or 4 Skype contacts) and switch
between them by using the function key
“ ＊
1
”
. Multi-Call can be done when user
is making or answering a call.