landline contact by pressing
“
*
1
” keys again. If user doesn’t answer the
incoming Skype call after 10 seconds and tool tip disappears, the incoming call
will be rejected.
4. For busy tone, user can refer to this user manual Sec. 4.10.1
Make a Skype
Multi-Call
.
5. When user presses Multi-Call function key
“
*
1
”, user needs to press key “1”
after key
“
*”
within 3 seconds. Otherwise the current call will be hung up and
won’t be reserved.
4.10.3 Switch calls in a Multi-Call
When user wants to switch between contacts in a Multi-Call, he/she can press the
”
*
”
and
“1” keys and soon there is a Skype dial tone coming up. Pressing the
“
*
”
and
“1” keys again after the dial tone, the talk is then switched to the next
reserved call.
The sequence of the switch circulation is the same as the sequence these calls
were established. For example, user sets up call 1 to call 4. After user talks to call
4, the next switch will be call 1.
4.10.4 Hang up the current call
1. During a Multi-Call call (at least 2 contacts), the current call will end after 3
seconds if user presses
“
*
” key. A Skype dial tone comes up and user can
decide to make a new call or switch back to the reserved call.
2. If the current call is a landline call, pressing
“
*
” key will disconnect the landline
call and switch to VoIP mode, and then a Skype dial tone comes up.
3. When user wants to cancel the current dialing call, press the
“
*
” key. The
dialing call can be cancelled and then a dial tone comes up. User can decide to
make a new call or press Multi-Call function key
“
*
1
” to switch to next reserved
call.
4. When user makes a Multi-Call to a contact with Skype Voicemail function enable,
user can decide to hang up the call by pressing “
*
” key or Multi-Call function key
Summary of Contents for SkyBox S1
