Regintech SkyBox S1, User Manual

Page: 37 / 91

International busy tone setting & User
’s busy tone parameter setting
User can choose the living country from country selection list to get the familiar
busy tone. When user can’t find the living country from the list, user can configure
the busy tone parameters themselves if they know the appropriate setting. Then
click OK. It is not necessary for user to change this setting for general application.
This feature also allows user to set the appropriate settings of busy tone when
SkyBox S1 is connected with one PBX for different application. By selecting a
country, the device will activate the specific busy tone frequency and cycle adopted
by local Public Switched Telephone Networks in that country. Sometimes, the
connecting PBX doesn't have the exact busy tone parameter as defined in user's
country. For this case, user might encounter busy tone detection and unfamiliar
busy tone problems even selecting user's country. User can configure the busy
tone parameters themselves if they know the appropriate setting. Enable user's
busy tone parameter setting option as below figure and fill in appropriate
parameters, then click OK. The parameter will be saved and active.
The default international busy tone country setting is decided by the “Select Setup
Language” selection when SkyBox S1 is installed. For example, when user selects
English, the default country will be United States. SkyBox S1 supports busy tone
for most countries now.