Regency
®
PG36 Gas Fireplace
|
25
installation
10) Place the embers on the front of the burner tray
in the places shown on the photo.
Place embers in these 3 locations
on the burner tray.
Embers
9) Place Log 02-52 between Logs 02-51 and
02-49 and on the indentation on Log 02-54.
The bottom right end sits behind the rear
grate tab.
Log indentation
Photo shows rear grate tab.
Log 02-51 was removed to show the
positioning of Log 02-52.
Rear
Grate
Tab
02-52
02-49
02-51
02-54
02-52
02-54
5th Grate Tab
Front Brackets
02-54
02-50
02-55
02-53
02-49
02-51
02-53
02-51
02-54
8) Position Log 02-54 across the cutouts in Logs
02-51 and 02-53. The notch in the bottom
right end fitting against the 5th grate tab.
11) Test fire to ensure proper light off (make sure
flame flows smoothly from one end of burner
to the other). If there is any flame hesitation,
check that area for any blockage of the burner
ports.
12) Install flush glass and bay glass (if used) as
per instructions in this manual.
02-50
02-55
02-49
02-53
02-51
02-54
02-52
