Regency
®
PG36 Gas Fireplace
|
33
maintenance
Log Replacement
The unit should never be used with broken logs. Turn
off the gas valve and allow the unit to cool before
opening door and carefully remove the logs. If for
any reason a log should need replacement, you
must use the proper replacement log. The position
of these logs must be as shown in the diagrams
under Log Installation.
Note: Improper positioning of logs may
create carbon build-up and will
severely alter the unit's performance
which is not covered under warranty.
Glass Gasket
If the glass gasket requires replacement use 5/8"
flat glass gasket for the Bay Front (Part # 936-243)
and a tadpole glass gasket for the Flush Front (Part
# 936-155).
Door Glass
Your Regency
®
fireplace is supplied with high
temperature, 5 mm Neoceram ceramic glass that will
withstand the highest heat that your unit will produce.
If your glass requires cleaning, we recommend
using an approved glass cleaner available at all
authorized dealers. Do not use abrasive materials.
Do not clean the glass when hot.
In the event that you break your glass by impact,
purchase your replacement from an authorized
Regency
®
dealer only, and follow our step-by-
step instructions for replacement.
Caution: Wear gloves when removing
damaged or broken glass.
Remove the flush door front (as per instructions in
the "Standard Flush Door" section). Remove the
4 glass clips from each corner. Slide in the new
replacement glass. Push the 4 glass clips back
onto the frame.
The glass must have gasketing
around it.
WARNING: Do not operate the appliance
with the glass panels removed,
cracked or broken. Replacement of
the glass panels should be done by
a licensed or qualified service person.
Flush Glass Replacement
