26
|
Regency
®
PG36 Gas Fireplace
installation
Standard Flush Door
The standard flush door
comes with a black frame.
Diagram 3
Use the hook to pull the spring out until you can put
the hook into the slot on the bottom door bracket.
Repeat for 2nd spring. See diagram 3.
Diagram 2
To install the frame, hook the top door flange onto
the top of the unit and swing the door towards the
unit, Diagram 1.
Be careful that the glass gasket does not roll up;
there must be a gap between the gasket and the
door lip to ensure that the door sits securely on
the unit. Diagram 2.
Diagram 1
To remove the flush door, reverse the above steps.
Flush Louvres
1)
Install the top louvre by sliding the two bracket
clips into the brackets located underneath the
top of the firebox.
2)
The bottom louvre has a hinge that is attached
(2 screws per hinge) to the lip on bottom of the
unit.
Note: Top and bottom louvres are
different.
