Greenfire® GF1500L-2 Gas Fireplace
| 49
installation
Log Set Installation
919-587a
05/29/17
LOG SET INSTALLATION
Read the instructions below carefully and refer to the images.
If the logs are broken do not use the unit until they are
replaced.
Broken logs can interfere with pilot operation.
Improper positioning of the logs may create carbon build-up
and can alter the unit's performance which is not covered
under warranty.
Log kit # 606-930 contains the following pieces:
2. Line up locators on Log 1 with corresponding locators on Log
Tray as shown in Diagram 3.
3. Line up locators on Log 2 with corresponding locators on Ceramic Log
Burner as shown in Diagram 4 and 5.
4. Line up the locator on Log 3 with the corresponding locator on ceramic
log burner as shown in Diagram 6.
Description
1
Log 1-Rear Log
1
Log 2- Left log
1
Log 3- Center Log
1
Log 4- Right Log
1
Log 5- Front left Log Piece
1
Log 6- Front Center Log piece
1
Log 7- Front Right Log piece
1
Bag Embers
Diagram 3
1
Diagram 5
Log 2 should perfectly fit into this space
2
Diagram 4
Position of Log 2
2
3
1
3
4
5
6
7
Diagram 1
Complete Log Install and Log Identification
2
Diagram 6
1. Install the supplied embers on exposed screw holes located on
top of the ceramic burner as shown in Diagram 2.
Diagram 2
1
GF1500
