7
Hull Identification Number
The United States Coast Guard has established
a universal system of numerically recognizing ves-
sels by using a hull identification number or “HIN.”
This number identifies your Regal yachts’ model,
hull number, month and year of manufacture. The
HIN is normally
found on your boat’s
hull on the starboard
side, just below the
rub rail on the tran-
som vertical surface. The HIN is stamped on a
plate and reinforced with a special adhesive. The
HIN consists of 12 alpha or numeric characters.
It is recommended that you locate and write down
the HIN for future reference. It can be especially
useful when ordering parts from your Regal dealer.
A second HIN number is found in a hidden loca-
tion. This second HIN is useful to authorities if the
vessel is stolen and/or the original transom HIN is
modified or eliminated.
Vessel Float Plan
Formulate the float plan on the following page be-
fore departing. Leave it with a responsible person
who will notify the United States Coast Guard or
local law enforcement authorities if you do not re-
turn as planned. If you change your plans be sure
to notify this person. Make copies of the float plan
and use one each time you go boating. This will
help people know where to find you should you not
return on schedule. Do not file the float plan with
the United States Coast Guard.
Owner’s Information Packet
An owner’s informa-
tion packet (black
satchel) is located
on the vessel. Read
and become familiar
with the materials.
This packet contains valuable information on your
propulsion package, standard and optional equip-
ment, systems, care and maintenance along with
component warranty. Store the information packet
in a clean, dry location on board your vessel.
Vessel Information Sheet
It is recommended that you fill out the information
on the following page. It will supply vital statistics
on your vessel.
ABYC Yacht Plate
In proximity to the
h e l m o n R e g a l
boats over 26’ in
length is a NMMA
(National Marine
M a n u f a c t u r e r ’s
Association) yacht plate. This plate recognizes that
your vessel was built to ABYC design compliance
standards in effect on the date the certification
was verified. The plate also states that your
vessel complies with United States Coast Guard
safety system standards in effect on the date of
certification.
Note: Overloading, improper loading and weight
distribution are well documented causes of
accidents. Provide for an extra margin of safety in
rough sea conditions.
Summary of Contents for 38 SAV 2019
