73
Remote Battery Switch Description
1.
Accessory House Battery-
This remote battery
switch is connected to the largest DC amperage
components that may be installed including the
bow thruster, windlass, generator and stabilizer
(Seakeeper). One of the battery charger legs is
connected to this battery switch to provide charg-
ing current to the accessory house battery when
on shore power. With the engine running a dedi-
cated stator charging output #6 wire is connected
to an Aux. charge breaker and then supplies cur-
rent to accessory house battery.
2.
Charging Relay-
This is known as an ACR
switch which translates to Automatic Charging
Relay. This device permits charging current to be
shared between the accessory house and port en-
gine batteries. It also allows paralleling of battery
banks for emergency starting through the battery
activation panel. It isolates batteries when dis-
charging and starting the port engine.
3.
Port Battery-
This remote battery switch is con-
nected to the port engine starting battery circuit.
4.
Parallel-
This remote battery switch parallels
the port and starboard engine batteries for emer-
gency starting by depressing the engine parallel
button at the battery activation panel. In addition,
there are take-off lugs for the port and starboard
steering circuits.
5.
Stbd Battery-
This remote battery switch is
connected to the starboard engine starting battery
circuit.
5.
Charging Relay-
This is known as an ACR
switch which translates to Automatic Charging
Relay. This device permits charging current to be
shared between the house main and starboard en-
gine batteries. It also allows paralleling of battery
banks for emergency starting through the battery
activation panel. It isolates batteries when dis-
charging and starting the port engine.
6.
House Battery-
This remote battery switch is
connected to the house main battery. One of the
battery charger legs is connected to this battery
switch to provide charging current to the house
main battery when on shore power. With the en-
gine running a dedicated stator charging output
#6 wire is connected to an Aux. charge breaker
and then supplies current to main house battery.
There is also a take-off lug for the house battery to
dash breaker.
7.
Parallel-
This remote battery switch parallels the
house main and center engine batteries for emer-
gency starting by depressing the house parallel
button at the battery activation panel. In addition,
there are take-off lugs for the port and starboard
steering circuits.
8.
Center Battery-
This remote battery switch is
connected to the center engine starting battery.
One of the battery charger legs is connected to
this battery switch to provide charging current to
the center engine battery when on shore power.
With the engine running a dedicated stator charg-
ing output #6 wire is connected to an Aux. charge
breaker and center engine battery.
Note the above
parallel function is only available with triple outboard
engines.
Summary of Contents for 38 SAV 2019
