Regal 38 SAV 2019, Owner'S Manual

Page: 177 / 297

177
Chapter 7
Auxiliary Equipment Operation
Overview
This chapter will assist the boat operator in
understanding selected standard and optional
equipment components on the vessel.
Select
equipment described may not be installed on your boat
or the pictorials may not exactly resemble equipment
on your craft.
Remember, Regal is constantly
improving its product line and therefore may make
changes in vendor parts and specifications without
notice. For detailed information on equipment,
please refer to the owner’s information packet.
Anchor Windlass (Typical)
WINDLASS
GIPSY
WINDLASS UP-DOWN
SWITCH
ROPE
LOCKER
SNAP
HOOK
LANYARD CLEAT
SAFETY
CLUTCH
FAIL SAFE
LEVER
CONTROL
ARM
ANCHOR
SWIVEL
SAFETY
PIN
ANCHOR
SHANK
CUTOFF
SWITCH
Anchor Windlass Introduction
If installed the windlass
features a stainless steel
polished “claw” style an-
chor complete with swivel.
Claw’s include high hold-
ing power in most seabeds.
A momentary windlass rocker switch located at the
anchor locker controls the lowering and retrieving of
the anchor through the windlass. A 50 amp breaker
for windlass over current protection is located at the
battery management panel There is a lanyard with a
snap hook to add holding power when the anchor
is in the stored position. The cleat is for tying off
the anchor rode rather than maintaining constant
pressure on the windlass itself.