Operation & Maintenance w/IPB
G2 Series Decontamination Water Heater
0001
Part Number: 1006375
0001-2
DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
The following safety precautions should be observed:
•
This unit
must
•
be grounded. Make sure the water heater is equipped with a GFCI built into the power supply
cord.
Never
•
fill the burner fuel tank while the water heater is running or hot. Allow a minimum of five minutes for
the water heater to cool before refueling.
Do Not
•
modify the electrical plug. If the plug will not fit into the outlet, have a proper outlet installed by a
qualified electrician.
Do Not
•
use extension cords with this water heater.
Never
•
Stay alert – watch what you are doing.
allow any part of your body or clothing to come in contact with the heat exchanger.
Do Not
•
Before performing any maintenance work:
operate the unit when fatigued or under the influence of drugs
or alcohol.
(a). Turn power switch to the OFF position.
(b). Disconnect the power cord from grounded power supply.
(c). Wait for water heater to cool down.
QUALIFIED PERSONNEL
A qualified person is someone who is familiar with this manual, the operation of the G2 Series Decontamination Water
Heater, the hazards involved in its operation and maintenance and who has been certified by the Reeves EMS
training program.
This manual is not intended to be a substitute for proper training. Reeves EMS strongly recommends that all receive
training directly from Reeves EMS.
READ ALL OF THE INFORMATION CONTAINED IN THIS MANUAL BEFORE
OPERATING THE DECONTAMINATION WATER HEATER
IMPORTANT
END OF WORK PACKAGE
