Reely HCP80, Operating Instructions Manual

Page: 87 / 240

87
13. The System Setting Menu „SYSTEM“
The basic settings of the remote control transmitter are made in the system setup menu first. These settings are not
referred to individual models. The specific settings of the individual models are only made afterwards in the function
setting menu (see chapter 14).
To get to the system setting menu, push and hold the two buttons „UP“ and „DOWN“ at the same time and switch on
the transmitter with the on/off switch.
When the system setting menu is displayed and the remote control makes two short confirmation sounds, release
the two buttons again.
The first 4 menu items of the system setting menu are now
displayed; see figure on the right.
The following setting functions are available to you in the system setting menu:
Function
Display
Model name settings „1: MDL NAME“
Model memory selection „2: MDL SEL“
Copying model memory „3: MDL COPY“
Reset model memory „4: MDL RST“
Model type selection „5: MDL TYPE“
Control stick assignment „6: STK TYPE“
Calibrate pitch stick middle position „7: STK ADJ“
To leave the system setting menu again and to return to the operating system, push the two buttons „UP“ and „DOWN“
at the same time again.
When you have called a menu item in the system setting menu, it is possible to switch right to the adjacent
menu item with the button „UP“ or „DOWN“, which then has also been called already without having to take
the detour across the menu item display.
Figure 22