Reechcraft PowerPole, Operators Safety Manual

Page: 47 / 48

www.reechcraft.com/PowerPole
888-600-6160
47
secti
On
7
TRANSPORT, STORAGE, AND MAINTENANCE
ANNUAL INSPECTION AND MAINTENANCE LOG
Competent Person (Print)
Date of Inspection
Company Name
Jobsite
Signature of Competent Person
Comments
Component OK Inspection/Action
Scheduled
Maintenance
Be sure that all daily and weekly inspection and
maintenance have been completed.
Gearbox
Completely remove the gearbox from traveler.
Check over entire gear box for excessive wear,
oil leaks, or any damage. Check to ensure input
shaft and output gears are not sloppy around
the bearings. Call your dealer or ReechCraft for
replacement parts. Inspect drive gear for wear.
If gear tooth profile is not symmetrical on 1 or
more teeth, or there appears to be any damage
to the gear, discard and replace immediately.
Verify the clutch force of the gearbox. Be sure
that all bearings, guides, and gearbox gears are
functioning properly. Erect a single mast assembly
with traveler next to a structure. Taking all necessary
safety precautions and with the traveler less than
20 inches off the ground, load 750 lbs and secure
to the unit (no work platforms etc.). Make sure
you can lift approximately 750 lbs without stalling.
If not, call your dealer or contact ReechCraft for
recommendations or service parts.
Outrigger
Base
Visually inspect all welds for any cracking or
excessive rust. Check screw stabilizers for wear or
damage. Service screw with lightweight spray-on
lubricant and use drill to turn screw, allowing the
lubrication to penetrate the female threads. Check
to make sure swivel joint on screw base is not
damaged and is secure and functioning properly.