Reechcraft PowerPole, Operators Safety Manual

Page: 24 / 48

24
secti
On
ERECTING THE SYSTEM
3
9. Important: Before erecting the mast assembly into position, thoroughly
examine area from the ground up to be sure there are no electrical
lines or other obstructions that will interfere with the erection of the
assembly. By starting at the top end of the assembly, lift the assembly
and walk towards the structure until the wheels contact the 2” x 4” stop
board. Continue to lift and tilt the assembly upward into position while
walking toward the structure.
ERECTING THE OUTRIGGER CONFIGURATION (cont’d)
10. Take care in the final portion of erection as the lifting force becomes a
pulling force. Ease the mast assembly against the structure.
Fig. 3.13
Fig. 3.12