Reechcraft PowerPole, Operators Safety Manual

Page: 31 / 48

www.reechcraft.com/PowerPole
888-600-6160
31
secti
On
5
POwER SYSTEM INSTALLATION
5. Be sure the flats of the driver are seated properly in the chuck jaws
and that there is adequate engagement of the driver to the drill.
Secure the driver to the drill by tightening the chuck with the chuck
key. Keyless chucks are not permitted.
6. Check to be sure the chuck key is removed from the drill chuck before
turning on the tool.
7. Place the drill with driver into the drill bracket, align the driver to the
gearbox input shaft and press lightly downward until driver fully
seats on the input shaft. Important: The drill with driver must be able
to insert freely through the drill bracket and on to the input shaft.
Remove any obstructions and make necessary adjustments so the
drill can be inserted freely.
DRILL INSTALLATION
Fig. 5.3
8. The drill bracket is designed to
hold the drill on the gearbox
input shaft and also keep the drill
body from rotating during
operation. Be sure the drill
bracket is secure and functioning
properly before proceeding. With
the drill and driver indexed to the
8 o’clock position (Fig. 5.4), gently
tighten the drill bracket wing nut.
Important: Periodically check
and adjust the wing nut to ensure
a secure fit.
Fig. 5.4