Reechcraft PowerPole, Operators Safety Manual

Page: 35 / 48

www.reechcraft.com/PowerPole
888-600-6160
35
secti
On
6
OPERATING THE SYSTEM
5. While lifting the platform, always keep hands free from any moving
parts. Raise the platform by placing the drill in the forward (clockwise)
position and pulling the trigger. Release the trigger to stop. Always
allow the lock lever to ratchet while lifting the work platform.
6. While conducting work on the platform, it is required that the
platform remain level and stationary. However, if only one person
is on the platform, it is permissible to allow the platform to
temporarily slope up to 10 degrees while repositioning the platform
to a different work height. In this case, the work platform temporarily
becomes a walkway, guiding you back and forth between the mast
assemblies for adjusting the height.
7. Important: If you are raising the platform one side at a time, be
sure all material and tools are secured on the platform to allow for
a temporary 10 degree angle of the platform. Never exceed a
temporary platform angle of 10 degrees off horizontal. Transfer back
and forth on the walkway. Do not conduct work until the platform is
level.
OPERATING THE WORK PLATFORM (cont’d)
Fig. 6.2 Fig. 6.3
Fig. 6.4