www.reechcraft.com/powerlift
888-600-6160
51
SECTI
ON
6
SERVICE & MAINTENANCE
The preventive maintenance and inspection checks are listed and defined in
the following table. The table is divided into two parts: “AREA” and “INTERVAL”.
The component or function to be inspected are listed in the AREA column and
the interval at which time they are to be inspected are listed in the INTERVAL
column.
NOTE:
The checks and services listed in this schedule are not intended to take
the place of any local or regional regulations that may pertain to this type
of equipment nor should the list be considered as all inclusive. Variances in
interval times may occur due to the environment the machine is subjected to.
Inspection and Maintenance Codes:
1. Check for proper and secure installation
2. No gouges, excessive wear, or dents showing
3. Visually inspect for excessive wear, damage, cracks or distortion
4. Check for cracked or broken welds
5. Check area is clean and free of debris
6. Check for proper adjustment
7. Check for proper operation
8. Check for proper spring back
9. Check for signs of leakage
10. Check for proper tolerances
11. Check for proper specifications
12. Verify
13. Perform
14. Replace
15. Inspect per Operator’s Safety Manual
6.3
Preventive Maintenance & Inspection Schedule
www.industrialproducts.com | [email protected] | 888-243-3339
