www.reechcraft.com/powerlift
888-600-6160
31
DO NOT USE MACHINE IF CHASSIS CANNOT BE LEVELED
Elevating
Make sure the pre-start inspection has been completed and the machine is safe
to use and the chassis is level and stable with all four outriggers bearing weight.
Move the direction selector so the drill motor is in the forward (clockwise)
position.
Hold the drill motor
handle firmly,
push down lightly
to automatically
disengage the drive
shaft brake and
squeeze the trigger to
elevate.
Stop using the drill
motor if any part of it
becomes excessively
hot. Wait until the
drill motor has
cooled down before
continuing operation.
DANGER
NOTICE
CAUTION
WARNING
Figure 3-5
Drill Motor Operation / Elevating
Figure 3-4
Bubble Level
SECTI
ON
3
MACHINE OPERATION
www.industrialproducts.com | [email protected] | 888-243-3339
