PowerLift
by ReechCraft
28
SECTI
ON
3
MACHINE OPERATION
Drill Motor
ReechCraft recommends a cordless drill of at least 18V capacity or a corded
drill of at least 7 amps.
Ensure the drill motor’s optional “Hammer” setting is disabled and the drill
motor is in “Drill” mode.
Figure 3-2
- Typical Drill Motor
1. Chuck
2. Torque control (cordless drill option)
3. Power Trigger
4. Speed Controller (optional)
5. Drill/Hammer Function Selector (optional)
6. Direction Selector
7. Battery Pack (cordless)
8. Power Cord
USE ONLY CORDLESS OR DOUBLE INSULATED CORDED DRILL MOTORS.
DISCONTINUE THE USE OF THE DRILL IF A FAULT IS DETECTED. ENSURE THE DRILL
MOTOR IS IN “DRILL” MODE AND SET TO THE APPROPRIATE TORQUE SETTING.
DANGER
NOTICE
CAUTION
WARNING
1
2
3
4
5
6
7
8
