background image

www.reechcraft.com/powerlift   

888-600-6160

3

THIS PRODUCT MUST COMPLY WITH ALL SAFETY RELATED BULLETINS. 
CONTACT REECHCRAFT, INC. OR THE LOCAL AUTHORIZED REECHCRAFT 
REPRESENTATIVE FOR INFORMATION REGARDING SAFETY RELATED 
BULLETINS WHICH MAY HAVE BEEN ISSUED FOR THIS PRODUCT.

REECHCRAFT, INC. SENDS SAFETY RELATED BULLETINS TO THE OWNER 
OF RECORD OF THIS MACHINE. CONTACT REECHCRAFT TO ENSURE THAT 
THE CURRENT OWNER RECORDS ARE UPDATED AND ACCURATE.

REECHCRAFT MUST BE NOTIFIED IMMEDIATELY IN ALL INSTANCES 
WHERE OUR PRODUCTS HAVE BEEN INVOLVED IN AN ACCIDENT 
INVOLVING BODILY INJURY OR DEATH OF PERSONNEL OR WHERE 
SUBSTANTIAL PERSONAL PROPERTY DAMAGE OR DAMAGE TO THE 
REECHCRAFT PRODUCT HAS OCCURRED.

FORWARD

DANGER

NOTICE

CAUTION

WARNING

DANGER

NOTICE

CAUTION

WARNING

DANGER

NOTICE

CAUTION

WARNING

FOR:

x

Accident Reporting

x

Product Safety Publications

x

Current Owner Updates

x

Product Safety Questions

x

Standards and Regulations Compliance Information

x

Questions Regarding Special Applications

x

Questions Regarding Product Modifications

CONTACT:

Technical Safety and Engineering Department 

845 34th St S
Fargo, ND 58102

E-mail: [email protected]

In USA

Toll Free: 888-600-6160

Outside USA

Phone: 701-280-5900  

www.industrialproducts.com | [email protected] | 888-243-3339

Summary of Contents for PowerLift PL60

































































Reviews: