Redmond RMC-M10DE, User Manual

Page: 31 / 60

31
Multicookers RMC-M10DE / RMC-M20DE / RMC-M30DE
GBR
RHP-M1 — ham maker for RMC-M20DE / RMC-M30DE
Designed for cooking ham, rolls and other delicacies of meat, poultry or
fish with the addition of various spices. It may be used with multicook -
ers from other manufacturers, in the oven or in a pan aerogrill with
appropriate volume.
RB-A300 — non-stick coated bowl for RMC-M10DE
Capacity: 3 L. The bowl features excellent non-stick and thermal conductiv-
ity properties. It is suitable for product storage and oven use (below 260°C).
Ceramic coated bowles by ANATO® (Korea): RB-C302 (3 L, for RMC-M10DE),
RB-C502 (5 L, for RMC-M20DE), RB-C602 (6 L, for RMC-M30DE)
The ceramic bowl has excellent non-stick and thermal conductivity proper-
ties. It was especially designed for baking, frying and cooking hot cereals.
Suitable for product storage and oven use.
RB-A503 — non-stick coated bowl by DAIKIN ® (Japan), for RMC-M20DE
Capacity: 5 L. Non-stick coating of the bowl is scratch-resistant and fea-
tures excellent thermal conductivity properties. It was especially designed
for frying, baking, and cooking hot cereals. The bowl is suitable for product
storage and oven use.
RB-S500 — steel bowl for RMC-M20DE
Capacity: 5 L. The bowl features excellent non-stick and thermal con-
ductivity properties. Recommended for making various soups and jams.
Suitable for blender and mixer use to prepare fruit and vegetable purees
and cream soups.
RB-A600 — non-stick coated bowl for RMC-M30DE
Capacity: 6 L. The bowl features excellent non-stick and thermal conductivity
properties. It is suitable for product storage and oven use (below 260°C).
V. CLEANING AND GENERAL MAINTENANCE
GUIDELINES
Before you start cleaning the device, make sure that it is unplugged and
has cooled down. Use soft cloth and mild soap to clean. We recommend
cleaning the appliance after each use. Prior to first use or in order to
remove the odor, boil half a lemon for 15 minutes using “DAMPFGAREN/
KOCHEN” program.
Do not use a sponge with a hard or abrasive surface; solvent and abra-
sive cleaning methods (gasoline, acetone) are not allowed. Do not im -
merse the device in water or wash it under running water.
Clean the housing as needed, following cleaning and general mainte-
nance guidelines provided. We recommend cleaning inner aluminum lid
after each use.
It is recommended to clean
the bowl after each use.
The bowl is dishwasher safe. By the end of cleaning,
wipe the bowl dry.
The steam valve
needs to be cleaned after each use.
The steam valve can be taken off from the inner or
outer side of the lid (depending on the model).
Gently, without effort pull the steam valve towards
yourself in order to remove it from the outer side of
the lid (Fig. A). Disassemble and rinse under running
water. Let the valve dry, carry out the assembly in return
sequence and install back into place.
Gently turn
the steam valve counterclockwise in order
to remove it from the inner side of the lid (Fig. B). Rinse
the valve under running water, let it dry and install
back into place, by turning clockwise.
Clean
the condensation collector, located on the hous-
ing of the device after each use. Gently press the lower part of the col-
lector or hold it by its sides (depending on the model) and gently pull it
towards yourself to remove. Pour the condensate out, wash the collector
and install it back into place.
Condensation may sometimes accumulate in the special cavity around
the bowl. Remove it with cloth or tissue.
A
B