Redmond RMC-M10DE, User Manual

Page: 28 / 60

28
Prior to First Use
Carefully unpack the device, remove all packaging materials and stickers
except the one with the unit’s serial number.
The absence of the serial
number will deprive you of your warranty benefits. Wipe all interior and
exterior surfaces of the unit with a soft, damp cloth. Wash the bowl in
warm soapy water. Rinse and dry thoroughly. Odor on first use of the ap -
pliance is normal. In such case, clean the device (p. 31).
II. OPERATION
Before Use
Place the device on a flat, stable, and hard surface away from any objects or
cabinets that could be damaged by steam, humidity, or high temperatures.
Before operating, make sure that the outer and inner parts of the multi-
cooker have no dents, cracks or any other visible damages. There should
not be any obstructions between the heating element and the bowl.
Setting the Cooking Time
Multicookers REDMOND RMC-M10DE/RMC-M20DE/RMC-M30DE allow
manually adjusting the cooking time, set by default for each program. Set-
ting interval and range of cooking time settings depend on the program
of cooking chosen. To adjust the time:
1. Press “MENÜ” button repeatedly to select the program. Default time
for each program is displayed.
2. Use “KOCHZEIT” button to adjust the cooking time within the range
of the program chosen. Press and release to advance one digit at a
time or hold the button down to scroll through the digits until the
desired time is selected. Once you reach the maximum setting the
count starts from the beginning.
IMPORTANT! Manually changing the cooking time, consider setting time
range and setting interval of a chosen program, given in the table of
default settings (p. 36).
In “DAMPFGAREN/ KOCHEN” program the countdown starts only when
the water comes to a full boil, providing enough steam.
Preset Function
Preset function allows you to delay a program for a period of time up
to 24 hours.
1. Press
“MENÜ”
button repeatedly to select the program.
2. Press “STARTZEIT VORWAHL” button. Time indicator starts blinking.
3. Use “KOCHZEIT” button to set the hours. Press and release to ad-
vance one digit at a time or hold the button down to scroll through
the digits. Once you reach the maximum setting the count starts
from the beginning.
4. Use “MENÜ” button to set the minutes. Press and release to advance
one digit at a time or hold the button down to scroll through the
digits. Once you reach the maximum setting, the count starts from
the beginning.
5. When the time is set, press
“STARTZEIT VORWAHL”
button.
6. Use “WARMHALTEN/ BEENDEN” button to cancel the settings or
reset.
IMPORTANT! It is not recommended to use Preset function if dairy or
perishable products are being used (eggs, fresh milk, meat, cheese, etc.).
Preset function is not available in “BRATEN” program.
Setting the Preset function in “DAMPFGAREN/ KOCHEN” program re-
member that the countdown begins only after water comes to a full boil.
This is a non-volatile memory unit. In case of a short term power cut-off
all settings will be saved.
Keep Warm Function
Keep Warm function is being activated automatically at the end of the
cooking program. It allows maintaining the temperature of 70-75°C for a
period of time up to 24 hours. Keep Warm countdown is displayed. Press
“WARMHALTEN/ BEENDEN” button to disable the function. “WARM -
HALTEN” indicator goes off. Keep Warm function is not available in “JO-
GHURT/ HEFETEIG” program.