red
COMPACT 24 BOILER
Chapter
9
USE AND MAINTENANCE MANUAL
page
43
Programming and settings
Technical dept. - All rights reserved - Reproduction prohibited
It is the second of the four available programmes. The setting method
is the same as for the above programme.
PROGRAMME 3
Abbreviation on the
display (8)
UT 11
UT 12
UT 13
Data to enter
Switch-on
Time
Switch-off
Time
Days ON or OFF
On/Off 1,2,3,4,5,6,7
It is the third of the four available programmes. The setting method is
the same as for PROGRAMME 1.
PROGRAMME 4
Abbreviation on the
display (8)
UT 14
UT 15
UT 16
Data to enter
Switch-on
Time
Switch-off
Time
Days ON or OFF
On/Off 1,2,3,4,5,6,7
It is the last of the four available programmes. The setting method is
the same as for PROGRAMME 1.
TO EXIT THE PROGRAMMING SEQUENCE, PRESS BUTTON 3
AGAIN ONCE YOU HAVE REACHED STEP “UT 16”.
IMPORTANT NOTE
The boiler takes 20 minutes to start up before sufficiently hot
air is released and another 10 minutes approximately before
it is running regularly. To adjust the switch-on time, please
take this time into consideration. Similarly, the boiler takes
approximately 30 minutes to shut down, during which time
the heat accumulated by the appliance is released into the
room. Take this time into consideration for considerable fuel
savings.
9.5.
PROGRAMMING EXAMPLE
Here is a complete programming example, where reference is made to
a weekly heating cycle in a home which is occupied full-time, by
occupants who come home for lunch and in the late afternoon.
During the week, the occupants want the heating to be on when they
wake up, during their lunch break and when they get in from work,
whereas on Saturdays and Sundays, the heating should always be on.
