Red Seal Measurement Datamate 2200, Operating & Maintenance Manual

Page: 13 / 128

Intro
Read This
First
Transmitter
Installation
Power Supply
Wiring
I/O
Wiring
Batch
Wiring
Startup
Trouble-
shooting
Program-
ming
Main
Menu
Config
Menu
System
Menu
Model
Numbers
Xmitter
Specs
Return
of Goods
Calibration
Menu
Diagnostic
Menu
Datamate 2200 O&M
Page 7
3.2 Mounting to a Wall
Refer to Figure 3.2.1 to mount the Datamate 2200 transmitter to a wall or other flat rigid
surface:
• Use four 1/4-inch or M6 bolts and nuts to mount the transmitter to a wall or other flat
surface. Use bolts and nuts that can withstand the process environment. RSM does
not supply the bolts or nuts. In order to maintain Type 4 rating, the four mounting
holes in the bottom of the enclosure must be sealed using the rubber-backed
washers supplied with the transmitter.
• To minimize stress on the housing, secure all four mounting bolts to the same
structure, which should be flat and should not vibrate or move excessively.
Do not secure bolts to separate beams, girders, or wall studs which can move
independently.
• Use washers to shim the housing if the mounting surface is not flat. Apply equal torque
to all bolts to ensure the transmitter is firmly mounted. R ed Seal Measurement does
not supply washers.