Datamate 2200 O&M
Page 96
9.7.6 Analog / Pulse / RS485 Output Configuration
Using the CONFIGURATION MENU TREE to enter the analog / pulse or RS485
output configuration.
The following chart highlights the configuration of the pulse / 4-20mA or RS485
outputs.
Menu or Display Description
Configuration
Configuration of the analog, pulse and communication outputs is completed
6. Outputs
in the Configuration menu. Configuration of Analog 1. Press ENTER to
configure Analog 1
Configure Outputs Use the UP or ACROSS key to select variable for Analog 1
1. Analog 1
Parameter
[XXXXXX]
Use the UP and ACROSS key to set Lower Range
Lower Range
[XXXXXX]
Use the UP and ACROSS key to set Upper Range
Upper Range
[XXXXXX]
Press enter to display
Cutoff
[XXXXXX]
Press enter to display
Min. Span
[XXXXXX]
Configure Outputs See Configure Outputs 1. Analog 1 above for non-total parameters.
2. Analog 2
Configure Output
See Configure Outputs 1. Analog 1 above for non-total parameters. For
3. Pulse
total parameters Use ^ and > to select parameter
Parameter
[XXXXX]
Use ^ and > to select K-Factor (pulses/unit)
[XXXX.XXX]
Use ^ and > to set max output frequency (max is 10,000 Hz)
[XXXXX.XXX] Hz
Max Output Frequency [XXXXX] Hz
Configure Outputs See Configure Outputs
4. Analog 4
1. Analog 1 above
Summary of Contents for Datamate 2200
Page 1: ...Datamate 2200 Operating Maintenance Manual M 612 Rev G Datamate 2200...
Page 18: ...Datamate 2200 O M Page 12...
Page 24: ...Datamate 2200 O M Page 18...
Page 127: ......
