![Red Seal Measurement Datamate 2200 Operating & Maintenance Manual Download Page 114](http://html1.mh-extra.com/html/red-seal-measurement/datamate-2200/datamate-2200_operating-and-maintenance-manual_1428500114.webp)
Datamate 2200 O&M
Page 108
Summary of HART Specific Programming Features and Functions
Section 5.7 — HART (Option Card) Wiring Connections
Up to 15 transmitters can be connected into a HART multi-drop network.
Section 9.2 - Main Menu (Operational Mode)
Default Display: The default display is not available on the HART communicator.
The top level menu on the HHC when connecting to a unit is the Main
Menu with options as listed.
Main Menu / 1. View Process Variable / 1. View Measurements
Five process variables are available for selection on the screen.
Additional variables are available by scrolling through the variable list
using the
↑
and
↓
keys. The value of the variable highlighted may be
viewed by pressing the
→
key.
Main Menu / 1. View Process Variable / 2. View Outputs / 1. View Analog 1
Main Menu / 1. View Process Variable / 2. View Outputs / 2. View Analog 2
Main Menu / 1. View Process Variable / 2. View Outputs / 4. View Analog 4
The following information may be viewed from these menu options:
PV Process Var: (Primary Variable) The process variable that has been
assigned to this output (Mass Rate, Volume Rate, Std
Volume Rate, % Concentration, Concentration Rate,
Density and Temperature)
Process Var:
Present value of the selected output
AO1 current:
The outputs present value in mA
AO1 % Range: The present % of range for the selected output
Main Menu / 1. View Process Variable / 2. View Outputs / 3. View Pulse Output
The following information may be viewed from this menu option:
TV Process Var: (Tertiary Variable) The process variable that has been
assigned to this output (Mass Total, Mass Forward,
Mass Reverse, Volume Total, Volume Forward,
Volume Reverse, Std Volume Total, Std Volume
Forward, Std Volume Reverse, Concentration Total,
Concentration Forward, Concentration Reverse.
Unit Total:
The present value of the output
Pulses/Unit:
Pulses per unit of measure
Pulses Out:
The number of pulses sent out.
OR
If a rate (mass, volume, standard volume or solids), temperature or
density is assigned to the pulse output, the following information may be
viewed:
Summary of Contents for Datamate 2200
Page 1: ...Datamate 2200 Operating Maintenance Manual M 612 Rev G Datamate 2200...
Page 18: ...Datamate 2200 O M Page 12...
Page 24: ...Datamate 2200 O M Page 18...
Page 127: ......