If you want to store
data into
particular
memory
# press the
type the desired Wpt memory ( X,X,
X,), then press
Example: Press
for
10.
If the letter
below the Wpt # on the display,
that
the
memory is being ‘Used” or already has Latitude/Longitude
coordinate data memorized into that
memory. If both the letters
and
appear below the
# the letters signify that this Wpt
memory is both “Used”
memorized) and the memory contents
are ‘Protected” (cannot be overwritten).
When a
is “Protected”, the contents of the memory may not be
changed or overwritten until the protection feature is removed. You can
“protect” and
your waypoints by following the procedure de-
scribed in the
List-SAVE function (see section 3.4.3.2.4) that
follows.
If the memory is protected, you can always enter a different memory
number or go to the
list for a look at the available
memories.
LIST Press this
to see a directory of the
memories.
When the
LIST
page appears, use the (up) (down)
direction keys (one at a time) to scroll through the
memory
listings in either
direction.
If the desired memory number is too far away
from the numbersdisplayed,just
key, followed by the number of the desired mem-
ory (X,X,X,). Then
The desired
memory will now become the selected location.
Example: select memory number 023: Press
BRG
DTG
If you want to store a new
or edit the
existing information of a selected (highlighted)
MENU TO RETURN
OPERATION 83
