traveled in Nautical or Statute Miles or Kilometers. The T
RIP
LOG
distance
can be reset to ‘00.0” by pressing
key and selecting
with the
Press the softkeyforthe
bypressing
the-key to reset the trip log counter to ‘00.0”.
3.43 The Navigation Menu
When
key is pressed and
is pressed,
the
NAVI
GATIO
N
appears on the display.
If the
100 GPS sensor is connected, any of the four main opera-
tions which appear on the NAVIGATION
M
EN
U
can be selected by pressing
the corresponding
at the left side of the display panel. If the GPS
not connected. the
SATELLITE
STATUS
pages will not appear on
the menu.
SATELLITE STATUS Checks the receiving condi-
tions
GPS signals, accepts the initial position
entry, and permits special set-ups
the
GPS receiver.
NAVIGATE SETUP
NAVIGATE
SETUP Selects Magnetic correction,
or
position display, Loran C Chain for
STORE WAYPOINTS
making TD conversions of waypoints.
ROUTE
This operation mode is used
to Name Store waypoints into memory. In this
mode you can also List, Copy, Protect, Erase, and
MENU TO RETURN
Measure (bearing and distance between) any waypoints or Events.
P
LAN
S
This operation mode is used to Make, Edit, List, or Select
a Route Plan to follow (forward or backwards, automatically or manually).
The operations available in the NAVIGATIONMENU allow the echosounder
to be used as a full function Navigator and can be activated whenever any
navaid providing properly formatted L/L position input data is connected
to the
The sections that follow discuss the various setup operations
available in the menu beginning with the NAVIGATE SETUP menu.
NOTE: The
100 GPS Mode and the SIGNAL STATUS menu opera-
tions appear in Section 3.5 of this chapter.
OPERATION 80
