66
ST70+ User Reference Manual
About Pilot
If the display is set as a Pilot Controller, carry out the following check:
1. With the
Diagnostics
menu displayed, scroll to select the
About pilot
option, then
press
OK
, to display the
About pilot
page. This shows:
2. Note that:
•
Temperature
should be in the range -30
°
C
to +70
°C
•
Volts (CAN)
should be 12 V
•
Volts
should be in the range 9 V to 16 V
3. Make a note of any data you need then press
OK:
.
•
If there is no more data to be displayed, the
display shows the
Diagnostics
menu.
•
If there is more data to be displayed, the next page of
About Display
data is dis-
played. Repeat step 3 until the display shows the
Diagnostics
menu.
Product support
Raymarine provides a comprehensive customer support service, on the world wide
web and by telephone help line. Please use either of these facilities if you are unable
to rectify a problem.
World wide web
Please visit the Customer Support area of our web site at:
www.raymarine.com
As well as providing a comprehensive Frequently Asked Questions section and
servicing information, the web site gives e-mail access to the Raymarine Technical
Support Department and a details of the locations of Raymarine agents, worldwide.
Telephone help line
If you do not have access to the world wide web, please call our help line.
In the USA
, call:
•
+1 603 881 5200 extension 2444
In the UK, Europe the Middle East or the Far East
, call:
•
+44 (0) 23 9271 4713 (voice)
•
+44 (0) 23 9266 1228 (fax)
•
Time since power on.
•
Temperature
•
NMEA manufacturer’s product code
•
Voltage
•
Raymarine product description.
•
Peak voltage
•
Raymarine product identity
•
Current
•
Software Version Number
•
Peak current
•
Hardware Version Number
•
Total hours run
•
Bootloader Version Number
D1
1408-1
Press OK to continue
About Pilot
Run Time
Software Ver.
Bootloader Ver.
Hardware Ver.
Temperature
Volts (CAN)
Volts
V0.20
V2.00
V0.10
35.20 C
12.0 V
12.26 V
85.00
Up Time
3.50
85024_1.book Page 66 Tuesday, January 27, 2009 11:31 AM
