18
ST70+ User Reference Manual
Setting time format
To set the required time format:
1. With the
Time & Date
setup menu displayed,
scroll to select the
Time Format
option, then
press
OK
to display the
Set time format
page.
2. Scroll to the required Time Format, then press
OK
to save the format and return to the
Time &
Date
summary page.
3. Press
OK
to select the
Time & Date
setup menu.
Setting local time
Note:
If your ST70+ display is connected to a Raymarine multi-
function display, then the time offset is controlled by the
multifunction display and you cannot use this procedure
to change it.
To set the display time to your local time.
1. At the
Time & Date
setup menu, use
<
and
>
to
select the
Set time offset
option, then press
OK
,
to display the
Set time offset
page.
2. Scroll to set the correct local time. For
example, if your local time is 1 hour after GMT,
set
-1
.
3. Press
OK
, to save the setting and return to the
Time & Date
setup menu.
Leaving date & time setup
When your date and time formats and values are
set as required:
1. At the
Time & Date
setup menu, scroll to the
Continue
option.
2. Press
OK
to proceed to the
Units summary
page.
3. Proceed from
Data units
(below).
D
111
5
5
-1
Time & Date
Set time format
Press OK to select
10
i
D1
1
156-1
Press OK to accept
Set time format
Use < & > to adjust.
CANCEL exits without saving.
12-hour
D1
1
157-1
Time & Date
Set time offset
Press OK to select
i
D1
1
158-1
Press OK to accept
Set time offset
Use < & > to adjust.
CANCEL exits without saving.
-1 hour
D1
1
150-1
Time & Date
Continue
Press OK to select
10
85024_1.book Page 18 Tuesday, January 27, 2009 11:31 AM
