Chapter 2: Commissioning Procedures
15
Setting Vessel Type
The
Vessel Type
menu enables you to automatically
apply the optimum system settings for your vessel
type. The options are:
*Power Cruiser
settings
. Note that the Power Cruiser settings apply as follows:
•
Power Cruiser 1 - vessels capable of speeds up to 12 knots.
•
Power Cruiser 2 - vessels capable of speeds up to 30 knots.
•
Power Cruiser 3 - vessels capable of speeds greater than 30 knots.
Select type
Scroll to select the vessel type that most closely corresponds to your vessel.
When you have chosen the vessel type, press
OK
to confirm the choice. The Time
and Date values and the data Units considered most appropriate for the Language
and Vessel Type you chose, are then automatically applied to your ST70+ system and
an automatic check of system parameters is carried out. On completion, a
System
configuration
page is present all displays in the system.
Setting display types and groups
You must now:
•
Select the display you want to set up.
•
Set the display type for each display (Instrument or Pilot Controller).
•
Allocate each display to a group.
•
Set the sequence number of each display within the group.
•
Link at least one keypad to each group.
To do this:
1. With the
System configuration
page displayed,
press
OK
to display the
Configure this display
page.
For unassigned displays (e.g. at first switch
on), the legends
Group
and
Number
are dis-
played. If the selected display has already
been set up, this shows the current group and
number in the group for the selected display.
2. Use the Select Display button as necessary, to
move the screen highlight to the display you want to set up, i. e. so it is the selected
display.
• Race Sail
• Inboard Speed Boat
• Sail Cruiser
• Power Cruiser 1*
• Catamaran
• Power Cruiser 2*
• Workboat
• Power Cruiser 3*
• RIB
• Sport Fishing
• Outboard Speed Boat
• Pro Fishing
i
D1
1
141-1
Vessel Type
Inboard Speedboat
Selecting vessel type helps us to
configure your system.
Press OK to select
i
D1
1
143-1
Press OK to configure this display
Configure this display
Group
Number
Select each display in turn. Press OK to
configure. When all done, press MENU.
85024_1.book Page 15 Tuesday, January 27, 2009 11:31 AM
