Raymarine RC520, Owner'S Handbook Manual

Page: 137 / 218

Chapter 7: Setting Up the System Defaults 123
- For some parameters, a soft key provides access to a sub-menu of further
options.
4. Press the soft key corresponding to the desired setting or, for scroll lists, use
the soft keys to scroll forwards or backwards through the list until the
required setting is highlighted. This setting is retained when you move the
selection bar on to the next parameter in the menu list.
For sliders, press the appropriate soft key repeatedly to increase or decrease
the slider value in individual steps, or press and hold the key to change the
setting quickly. The menu page is cleared so that you can see the effect of
the slider adjustment on the radar picture. When you have finished the
adjustment, press
ENTER
to re-display the menu page.
5. Once you have reset all the required values, press
ENTER
to clear the menu
and return to the set up soft keys.
6. Press
ENTER, MENU
or
CLEAR
to clear the soft keys and return to the
normal display.
You can return all the settings to their original factory settings, if required, by
performing a factory reset as described in
Chapter 9 .
Changing
the Set Up
Parameters