Raymarine RC520, Owner'S Handbook Manual

Page: 116 / 218

102 HSB Series LCD Display
Follow a Route
Note: The current route may have been created on this display, or created on
another unit and received on this display via SeaTalk.
If a route has been reversed or if a route on screen was being followed but
stopped before completion, the target waypoint – outlined by a square box –
may be different to when the route was created.
You should always check the target waypoint before initiating a follow route.
➤
To follow the current route:
1. Press the
GOTO
default soft key. The Goto/Follow soft keys are displayed.
2. Press the
FOLLOW ROUTE
soft key.
Alternatively, to follow a route:
Place the cursor over a route leg until the letters
RTE
and the route soft keys
are displayed then press
FOLLOW ROUTE
.
Your vessel’s current position becomes the origin, and the target waypoint in
the current route becomes the active target.
The soft keys change as follows:
D4251_1
CLEAR
ROUTE REVERSE
ROUTE
EDIT
ROUTE
STOP
FOLLOW
These options are described in the following sections.
➤
To follow the current route in reverse:
1. Press the
ROUTE
default soft key, followed by
MORE
. The route soft keys are
displayed.
2. Press the REVERSE ROUTE soft key. The current route is reversed on the
screen. Press
ENTER
or
CLEAR
.
3. Press the
GOTO
default soft key. The Goto/Follow soft keys are displayed.
4. Press the
FOLLOW ROUTE
soft key.
Alternatively:
Place the cursor over the route leg until the letters
RTE
and the route soft
keys are displayed. Press
REVERSE ROUTE
then
FOLLOW ROUTE
.
Your vessel’s current position becomes the origin, and the target waypoint in
the current route becomes the active target.
The soft keys change as follows:
D4172-1
RESTART
XTE
WAYPOINT
ADVANCE
GOTO
CURSOR
STOP
FOLLOW
These options are described in the following sections.
FOLLOW
ROUTE
FOLLOW
ROUTE
GOTO
REVERSE
ROUTE
GOTO
Follow a Route
Target Point Arrival & Alt